Single Point Aluminum Load Cell


  • Capacity 50-250kg
  • Anodized Aluminum Construction
  • Interchangeable design make it ideal for multi load cell large size low profile platform scales
  • IP66 protection
  • OIML R60 approved R60/2000-CN1-09.02

Outline Dimensions


M8 8.8 screws with socket head, tightening torque 25NM, or

5/16”-18UNC screws with socket head, tightening torque 15NM


True-Tec Grade R
OIML Accuracy Class C3
Rated capacity (E max) kg 50, 100, 125, 150, 200, 250
Y=Emax/vmin Typical 5000
Sensitivity mV/V 2.00
Sensitivity tolerance ± mV/V 0.0020
Current Calibration ± mV/V/Rout 0.05%
Zero balance ± mV/V 0.10
Creep over 30min. ± % 0.0167
Temperature effect on Zero ±%/10°C 0.020
Temperature effect on output ±%/10°C 0.012
Eccentric loading error ±%/cm 0.0057
Nominal temperature range °C -10 to +40
Service temperature range °C -30 to +70
Limit load % of R.C. 150
Break load % of R.C. 300
Nominal excitation V 10
Max. excitation V 15
Input impedance Ohm 1165 ± 50
Output impedance Ohm 1000 ± 10
Insulation resistance MOhm > 2000
Compensation circuit type Balanced Bridge
Cable length m 1.5
Cable type 4x26 AWG, Black PVC Jacket
Color code +exc -green, +sig-red, -exc-black, -sig- white
Construction Anodized Aluminum Alloy
Protection class to IEC529 IP 66

Note: Special cable type and length available to order


Model PA28 is a low profile single point load cell designed for multi load cell application with direct mounting in low cost weighing platforms.

Its small physical size, combined with tightened sensitivity and current compensation, makes this low cost load cell ideally suited for low cost platform scales where savings in parts and labor due to simpler scales construction can be made.